GBOX2_APB112

Smart & fast key password calculation

Chips simulation & decoding

Identification ignition coil troubles

Compatible with IM608 & IM508

G-BOX2 Key Programming Adapter

The Autel G-BOX2 is an adapter compatible with Autel’s IM508 (with purchase of XP400 programmer) and IM608 Key Programming tablets used to aide in the programming keys for Mercedes DAS3 CAN EIS/EXS in an ALL Keys Lost situation. The G-Box2 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles. Bench Method is also supported. All Keys Lost password calculations are 4x to 8x faster. Moreover, the number of insertions and removals of W216 and W164 EISs after the year 2009 is reduced to zero, greatly simplifying the operation steps. It can be used in Boot Mode or Bench Method. G-BOX2 needs to be used with the Autel IM508 or IM608 for reliable performance.

SUPPORT MERCEDES ALL KEY LOST BMW DME READING

BENZ VEHICLES WITH DAS3 CAN EIS/EZS IN AKL

USE IN VEHICLE OR ON BENCH

READ / WRITE BOSCH ENGINE ECU ON BMW F CLASSIS

READ / WRITE BOSCH ENGINE ECU ON VW MQB

COMPATIBLE WITH IM608 & IM508

Autel G-BOX2 Key Programming Adapter
  • Faster password calculation
    for Benz All Key Lost
  • 8X times faster password calculation
    for W172, W204, W207
  • 4X times faster password calculation
    for W209, W211
  • No more repeated insertions and removals
    of IR simulator for 10 types of EIS
  • Passport reading for 9 type EIS
    when all keys lost on vehicle
  • BMW DME/DDE ISN reading for 20 types
    (EDC17, MEVD17, MSV90, MSD87, etc)
  • VAG ECM immo data reading & data synchronization
    for 18 types (MQB EDC17, MED17, etc)
  • XP400 may be required for certain functions
G-BOX2
PACKING LIST

G-BOX2

  • G-BOX2
  • DB15 Cable
  • Fuse Cable
  • Fuse 5A (2pcs)
  • Clamp Cable (2pcs)
  • K-Line Cable
  • OBDII Extension Cable
  • Quick Reference Guide

APB112 Smart Key Emulator

The Autel APB112 Smart Key Emulator is designed to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also emulate the vehicle key chip. The APB112 must be used with the XP400 in conjunction with a MaxiIM Key Programming Tablet.

SMART KEY EMULATOR
CHIP DECODING
TOYOTA/LEXUS SMART KEY ALL KEY LOST
46, 4D DATA COLLECTION
COMPATIBLE WITH IM608 & IM508
4D TRANSPONDER FUNCTIONS WITH XP400
APB112 smart key simulator
  • 46, 4D data collection
  • Smart key password calculation (Hyundai/Kia 46)
  • 46 chip simulation
  • Chip decoding (Hyundai 46)
  • Toyota 4D (94/D4, 98) smart key emulation
  • Toyota H (88/A8, A9, 39) smart key emulation
  • Collects data from ignition coil
  • Identify ignition coil troubles
  • Must be used with an Autel diagnostic tool
  • Compatible with IM608, IM508 & MX808IM
  • Compatible with XP400 for 4D
    transponder functions
  • Toyota/Lexus smart key all key lost
APB112 SMART KEY SIMULATOR
PACKING LIST

APB112

  • APB112 Smart Key Emulator
  • USB Cable
  • Quick Reference Guide