OE-Level Vehicle Coverage
OBD2 Diagnostic& Service
Oscilloscope & Wave Generator
Multimeter
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence. It features a 12.9-inch touchscreen tablet with Android 7.0 OS powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 256GB built-in memory, all powering the new split-screen multi-application navigation to provide diagnostic guidance and test components to confirm repairs. Combined with the dynamic topology module mapping, enhanced AutoSCAN features and Intelligent Diagnostics options, the Ultra offers the technicians step-by-step repair guidance. The new MaxiFlash VCMI functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester. The convenient docking station featured ensures you always have the power to scan.
DIAGNOSTICS FUNCTIONS
OE-LEVEL COVERAGE US/AS/EU 1996+
AUTOMATIC DETECTION
DTC ANALYSIS & FAULT CODE SOLUTIONS
DTC TROUBLE SHOOTING
LIVE & FREEZE FRAME DATA:VIEW / RECORD / PLAYBACK
SERVICE FUNCTIONS
ABS BLEEDING
ESP SENSOR CALIBRATION
BMS (BATTER MONITORING SYSTEM) RESET
OIL RESET
ELECTRIC PARKING BRAKE (EPB)
TIRE PRESSURE MONITORING SYSTEM (TPMS)
BATTERY MANAGEMENT SYSTEM
DIESEL PARTICLE FILTER (DPF)
IMMOBILIZER (IMMO)
STEERING ANGLE SENSOR (SAS)
FUEL INJECTORS CORRECTION
RESET THE HIGH PRESSURE FUEL PUMP LEARNED VALUES
FUEL INJECTORS CORRECTION
LDWS (LANE DEPARTURE WARNING SYSTEM) CAMERA ALIGMENT
…and more
ADVANCED CODING + ADAPTATION
MAXIFLASH VCMI
BUILT-IN OSCILLOSCOPE
An oscilloscope is a measuring instrument that shows how a signal varies with time in a graphical way. Various signal activities can be displayed and monitored on a two-dimensional grid. The graphical form created by a signal is called a waveform. The voltage-time characteristic of the signal or waveform is drawn as a visual line called the trace.
BUILT-IN WAVEFORM GENERATOR
The Waveform Generator is used to test a sensor, an actuator, or an ECU without the need to replace them one by one to identify the fault.
The waveforms in the online waveform library are picked and uploaded by Autel users during repair and test process using an oscilloscope. It allows you to search for the waveforms from the vehicle and component you want to test, or upload and share your own waveforms.
BUILT-IN MULTIMETER
The professional Multimeter measures Voltage, Current, Resistance, Diode, Frequency/Period, Duty Cycle, Connectivity and Pulse Width.
BUILT-IN CAN BUS CHECK
The CAN Bus Check can quickly determine whether the OBD pins are functioning correctly.
SET INCLUDES
ULTRAMaxiSys ULTRA
-
MaxiSys Ultra Tablet
-
MaxiFlash VCMI
-
Docking Station
-
Main Cable V2.0
-
USB 2.0 Cable V2
-
AC/DC Adapter (12V)
-
Scope Test Lead (4pcs)
-
Multimeter Test Lead (2pcs)
-
Secondary Ignitation Pickup (2pcs)
-
Attenuator 20:1 (2pcs)
-
Breakout Lead (4x6pcs)
-
Multimeter Probe (1x2pcs)
-
Flexible Back-pinning Probe (2x2pcs)
-
Back-pinning Probe (1x5pcs)
-
Back-pinning Probe Screw(2pcs)
-
Back-pinning Probe Replacement Needle (20pcs)
-
Small Crocodile Clip (2x2pcs)
-
Large Dolphin Clip (1x2pcs)
-
Cigarette Lighter
-
Light Fuse (2pcs)
-
Clipper Cable
-
Quick Reference Guide
-
Carry Case
Technical Specification
ULTRAMaxiSys ULTRA
Operating System | Android 7.0 |
Processor | Samsung Exynos8895V octa-core Processor (2.3GHz Quad-core Mongoose + 1.7GHz Quad-core A53) |
Memory | 4GB RAM & 256GB On-board Memory |
Display | 12.9 inch TFT-LCD with 2732 x 2048 resolution & capacitive touch screen |
Connectivity | WiFix2 (802.11 a/b/g/n/ac 2x2 MIMO), BT v.2.1 + EDR, GPS, USB 2.0 (Two USB HOST Type A, one USB mini device), HDMI 2.0, SD Card (Support up to 256GB) |
Camera | Rear: 16 Megapixel, Autofocus with Flashlight; Front: 5 Megapixel |
Sensors | Gravity Accelerometer, Ambient Light Sensor (ALS) |
Audio Input/Output | Microphone, Dual Speakers, 3-Band 3.5 mm stereo/standard headset jack |
Power and Battery |
18000mAh 3.8 V lithium-polymer battery Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C |
Input Voltage | 12V/3A Adapter |
Operating Temp. | 0 to 50°C (32 to 122°F) |
Operating Temperature | 0 to 50°C (32 to 122°F) |
Storage Temperature | -20 to 60°C (-4 to 140°F) |
Dimensions (WxHxD) | 366.5 mm (14.43") x 280.9 mm (11.06") x 34 mm (1.34") |
Weight | 2.18kg (4.81 lb.) |
Supported Protocols | DoIP, PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 Single Wire Can (GMLAN), ISO-11898-2, ISO-11898-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO-14230, SAE-J2610 (Chrysler SCI), UART Echo Byte, SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART with Clock, BMW DS2, BMW DS1, SAE J2819 (VAG KW81), KW82, SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2) |